Free Wishin I Was Fishin SVG

Wishin I Was Fishin in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wishin I Was Fishin in Lobster, as a solid black shape
Wishin I Was Fishin in Lobster. The preview is the SVG file itself.

“Wishin I Was Fishin” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
Pieces10 separate pieces
Outlines to cut14: 10 outer edges and 4 cut-outs
Cut length922 mm at this size
Narrowest part0.8 mm at this size
Nodes480 curve and line segments

Measured from the file. PNG: 2,000 × 900 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.2 mm234 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.41 mm468 mm55Too fine for most machines
3 × 1.28 in (76 × 33 mm)0.61 mm703 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.71 in (102 × 43 mm)0.81 mm937 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.57 in (152 × 65 mm)1.2 mm1,405 mm4Vinyl, card and thin sheet
8 × 3.42 in (203 × 87 mm)1.6 mm1,874 mm3Vinyl, card and thin sheet
12 × 5.14 in (305 × 130 mm)2.4 mm2,810 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Wishin I Was Fishin SVG files

← Wishin I Was Fishin in Pacifico All 12 Wishin I Was Fishin designs Wishin I Was Fishin in Kaushan Script →