Free Winter Wonderland SVG

Winter Wonderland in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Winter Wonderland in Alfa Slab One, as a solid black shape
Winter Wonderland in Alfa Slab One. The preview is the SVG file itself.

“Winter Wonderland” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 31 mm (3.94 × 1.2 in), scales to any size
Pieces17 separate pieces
Outlines to cut23: 17 outer edges and 6 cut-outs
Cut length798 mm at this size
Narrowest part1.6 mm at this size
Nodes305 curve and line segments

Measured from the file. PNG: 2,000 × 665 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.31 in (25 × 8 mm)0.41 mm203 mm240Too fine for most machines
2 × 0.61 in (51 × 16 mm)0.81 mm405 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.92 in (76 × 23 mm)1.2 mm608 mm30Vinyl, card and thin sheet
4 × 1.22 in (102 × 31 mm)1.6 mm811 mm16Vinyl, card and thin sheet
6 × 1.84 in (152 × 47 mm)2.4 mm1,216 mm5Vinyl, card and thin sheet
8 × 2.45 in (203 × 62 mm)3.3 mm1,622 mm4Any material, including 3 mm wood and acrylic
12 × 3.67 in (305 × 93 mm)4.9 mm2,432 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Winter Wonderland SVG files

← Winter Wonderland in Lilita One All 13 Winter Wonderland designs Winter Wonderland in Amatic SC →