Free Wife SVG

Wife in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wife in Alfa Slab One, as a solid black shape
Wife in Alfa Slab One. The preview is the SVG file itself.

“Wife” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 32 mm (3.94 × 1.27 in), scales to any size
Pieces5 separate pieces
Outlines to cut6: 5 outer edges and 1 cut-out
Cut length564 mm at this size
Narrowest part4.4 mm at this size
Nodes76 curve and line segments

Measured from the file. PNG: 2,000 × 696 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)1.1 mm143 mm230Vinyl, card and thin sheet
2 × 0.64 in (51 × 16 mm)2.2 mm287 mm70Vinyl, card and thin sheet
3 × 0.97 in (76 × 25 mm)3.4 mm430 mm30Any material, including 3 mm wood and acrylic
4 × 1.29 in (102 × 33 mm)4.5 mm573 mm16Any material, including 3 mm wood and acrylic
6 × 1.93 in (152 × 49 mm)6.7 mm860 mm5Any material, including 3 mm wood and acrylic
8 × 2.58 in (203 × 65 mm)8.9 mm1,146 mm4Any material, including 3 mm wood and acrylic
12 × 3.86 in (305 × 98 mm)13 mm1,719 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Wife SVG files

← Wife in Lilita One All 13 Wife designs Wife in Amatic SC →