Free We Wish You a Merry Christmas SVG

We Wish You a Merry in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

We Wish You a Merry in Alfa Slab One, as a solid black shape
We Wish You a Merry in Alfa Slab One. The preview is the SVG file itself.

“We Wish You a Merry Christmas” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 45 mm (3.94 × 1.79 in), scales to any size
Pieces23 separate pieces
Outlines to cut28: 23 outer edges and 5 cut-outs
Cut length1,158 mm at this size
Narrowest part1.3 mm at this size
Nodes494 curve and line segments

Measured from the file. PNG: 2,000 × 950 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 12 mm)0.33 mm294 mm180Too fine for most machines
2 × 0.91 in (51 × 23 mm)0.66 mm588 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.36 in (76 × 35 mm)0.99 mm882 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.82 in (102 × 46 mm)1.3 mm1,177 mm12Vinyl, card and thin sheet
6 × 2.72 in (152 × 69 mm)2 mm1,765 mm4Vinyl, card and thin sheet
8 × 3.63 in (203 × 92 mm)2.6 mm2,353 mm3Vinyl, card and thin sheet
12 × 5.45 in (305 × 138 mm)4 mm3,530 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More We Wish You a Merry Christmas SVG files

← We Wish You a Merry in Lilita One All 13 We Wish You a Merry Christmas designs We Wish You a Merry in Amatic SC →