Free We Still Do SVG

We Still Do in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

We Still Do in Amatic SC, as a solid black shape
We Still Do in Amatic SC. The preview is the SVG file itself.

“We Still Do” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 92 mm (3.94 × 3.62 in), scales to any size
Pieces9 separate pieces
Outlines to cut11: 9 outer edges and 2 cut-outs
Cut length1,045 mm at this size
Narrowest part2.3 mm at this size
Nodes305 curve and line segments

Measured from the file. PNG: 2,000 × 1,846 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.58 mm265 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.84 in (51 × 47 mm)1.2 mm531 mm25Vinyl, card and thin sheet
3 × 2.76 in (76 × 70 mm)1.8 mm796 mm12Vinyl, card and thin sheet
4 × 3.68 in (102 × 93 mm)2.3 mm1,062 mm6Vinyl, card and thin sheet
6 × 5.52 in (152 × 140 mm)3.5 mm1,593 mm2Any material, including 3 mm wood and acrylic
8 × 7.36 in (203 × 187 mm)4.7 mm2,123 mm1Any material, including 3 mm wood and acrylic
12 × 11.04 in (305 × 280 mm)7 mm3,185 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More We Still Do SVG files

← We Still Do in Alfa Slab One All 13 We Still Do designs We Still Do in block capitals →