Free Warm Winter Wishes SVG

Warm Winter Wishes in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Warm Winter Wishes in Lilita One, as a solid black shape
Warm Winter Wishes in Lilita One. The preview is the SVG file itself.

“Warm Winter Wishes” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 31 mm (3.94 × 1.22 in), scales to any size
Pieces18 separate pieces
Outlines to cut21: 18 outer edges and 3 cut-outs
Cut length744 mm at this size
Narrowest part1.8 mm at this size
Nodes316 curve and line segments

Measured from the file. PNG: 2,000 × 673 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.31 in (25 × 8 mm)0.46 mm189 mm230Too fine for most machines
2 × 0.62 in (51 × 16 mm)0.91 mm378 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.93 in (76 × 24 mm)1.4 mm567 mm30Vinyl, card and thin sheet
4 × 1.24 in (102 × 31 mm)1.8 mm756 mm16Vinyl, card and thin sheet
6 × 1.86 in (152 × 47 mm)2.7 mm1,134 mm5Vinyl, card and thin sheet
8 × 2.48 in (203 × 63 mm)3.7 mm1,512 mm4Any material, including 3 mm wood and acrylic
12 × 3.72 in (305 × 94 mm)5.5 mm2,268 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Warm Winter Wishes SVG files

← Warm Winter Wishes in Kaushan Script All 13 Warm Winter Wishes designs Warm Winter Wishes in Alfa Slab One →