Free turkey SVG

Turkey wishbone SVG

Turkey wishbone, as a solid black shape
Turkey wishbone. The preview is the SVG file itself.

The forked bone two people pull for a wish: two curved arms and a flat knob where they meet. A small extra for Thanksgiving place cards and napkin rings.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size66 × 100 mm (2.59 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length376 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes62 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,342 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.66 × 1 in (17 × 25 mm)Over 1.5 mm96 mm140Vinyl, card and thin sheet
1.32 × 2 in (33 × 51 mm)Over 3 mm191 mm40Any material, including 3 mm wood and acrylic
1.97 × 3 in (50 × 76 mm)Over 4.6 mm287 mm15Any material, including 3 mm wood and acrylic
2.63 × 4 in (67 × 102 mm)Over 6.1 mm382 mm8Any material, including 3 mm wood and acrylic
3.95 × 6 in (100 × 152 mm)Over 9.1 mm573 mm2Any material, including 3 mm wood and acrylic
5.26 × 8 in (134 × 203 mm)Over 12 mm764 mm2Any material, including 3 mm wood and acrylic
7.9 × 12 in (201 × 305 mm)Over 18 mm1,146 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More turkey SVG files

← Turkey face pieces All 20 turkeys Thanksgiving turkey with a fan tail →