Free Thy Will Be Done SVG

Thy Will Be Done in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Thy Will Be Done in Lilita One, as a solid black shape
Thy Will Be Done in Lilita One. The preview is the SVG file itself.

“Thy Will Be Done” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 52 mm (3.94 × 2.06 in), scales to any size
Pieces14 separate pieces
Outlines to cut20: 14 outer edges and 6 cut-outs
Cut length958 mm at this size
Narrowest part3.2 mm at this size
Nodes226 curve and line segments

Measured from the file. PNG: 2,000 × 1,085 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.52 in (25 × 13 mm)0.81 mm243 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.05 in (51 × 27 mm)1.6 mm487 mm45Vinyl, card and thin sheet
3 × 1.57 in (76 × 40 mm)2.4 mm730 mm18Vinyl, card and thin sheet
4 × 2.1 in (102 × 53 mm)3.3 mm973 mm10Any material, including 3 mm wood and acrylic
6 × 3.14 in (152 × 80 mm)4.9 mm1,460 mm3Any material, including 3 mm wood and acrylic
8 × 4.19 in (203 × 106 mm)6.5 mm1,947 mm2Any material, including 3 mm wood and acrylic
12 × 6.29 in (305 × 160 mm)9.8 mm2,920 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thy Will Be Done SVG files

← Thy Will Be Done in Kaushan Script All 13 Thy Will Be Done designs Thy Will Be Done in Alfa Slab One →