Free Thailand SVG

Thailand with its name beneath SVG

Thailand with its name beneath, as a solid black shape — Thailand with its name beneath. The preview is the SVG file itself.

The solid shape of Thailand with “THAILAND” in narrow capitals under it. The letters of “Thailand” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	50 × 100 mm (1.96 × 3.94 in), scales to any size
Pieces	10 separate pieces
Outlines to cut	13: 10 outer edges and 3 cut-outs
Cut length	625 mm at this size
Narrowest part	1.4 mm at this size
Nodes	534 curve and line segments

Measured from the file. PNG: 1,033 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.5 × 1 in (13 × 25 mm)	0.36 mm	159 mm	170	Too fine for most machines
0.99 × 2 in (25 × 51 mm)	0.71 mm	318 mm	50	Fine detail: vinyl and paper only, weed with care
1.49 × 3 in (38 × 76 mm)	1.1 mm	476 mm	21	Vinyl, card and thin sheet
1.99 × 4 in (50 × 102 mm)	1.4 mm	635 mm	10	Vinyl, card and thin sheet
2.98 × 6 in (76 × 152 mm)	2.1 mm	952 mm	3	Vinyl, card and thin sheet
3.98 × 8 in (101 × 203 mm)	2.8 mm	1,270 mm	2	Vinyl, card and thin sheet
5.96 × 12 in (151 × 305 mm)	4.3 mm	1,905 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thailand SVG files

← Thailand cut from a heart All 9 Thailand designs Split Thailand for a name →