Free Sweet Tea and Jesus SVG

Sweet Tea and Jesus with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Sweet Tea and Jesus with hearts, as a solid black shape
Sweet Tea and Jesus with hearts. The preview is the SVG file itself.

“Sweet Tea and Jesus” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 90 mm (3.94 × 3.54 in), scales to any size
Pieces14 separate pieces
Outlines to cut23: 14 outer edges and 9 cut-outs
Cut length1,320 mm at this size
Narrowest part0.9 mm at this size
Nodes399 curve and line segments

Measured from the file. PNG: 2,000 × 1,804 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.23 mm335 mm110Too fine for most machines
2 × 1.8 in (51 × 46 mm)0.46 mm671 mm30Too fine for most machines
3 × 2.69 in (76 × 68 mm)0.69 mm1,006 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.59 in (102 × 91 mm)0.91 mm1,341 mm6Fine detail: vinyl and paper only, weed with care
6 × 5.39 in (152 × 137 mm)1.4 mm2,012 mm2Vinyl, card and thin sheet
8 × 7.18 in (203 × 182 mm)1.8 mm2,682 mm1Vinyl, card and thin sheet
12 × 10.78 in (305 × 274 mm)2.7 mm4,023 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Sweet Tea and Jesus SVG files

← Sweet Tea and Jesus in script and capitals All 13 Sweet Tea and Jesus designs Sweet Tea and Jesus outline lettering →