Free Sweet Sassy and Six SVG

Sweet Sassy and Six in Alfa Slab One SVG

Sweet Sassy and Six in Alfa Slab One, as a solid black shape
Sweet Sassy and Six in Alfa Slab One. The preview is the SVG file itself.

“Sweet Sassy and Six” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 83 mm (3.94 × 3.25 in), scales to any size
Pieces17 separate pieces
Outlines to cut22: 17 outer edges and 5 cut-outs
Cut length1,342 mm at this size
Narrowest part2.6 mm at this size
Nodes602 curve and line segments

Measured from the file. PNG: 2,000 × 1,665 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.83 in (25 × 21 mm)0.66 mm341 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.65 in (51 × 42 mm)1.3 mm682 mm30Vinyl, card and thin sheet
3 × 2.48 in (76 × 63 mm)2 mm1,023 mm12Vinyl, card and thin sheet
4 × 3.3 in (102 × 84 mm)2.6 mm1,363 mm6Vinyl, card and thin sheet
6 × 4.96 in (152 × 126 mm)4 mm2,045 mm2Any material, including 3 mm wood and acrylic
8 × 6.61 in (203 × 168 mm)5.3 mm2,727 mm1Any material, including 3 mm wood and acrylic
12 × 9.91 in (305 × 252 mm)7.9 mm4,090 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Sweet Sassy and Six SVG files

← Sweet Sassy and Six in Lilita One All 12 Sweet Sassy and Six designs Sweet Sassy and Six in Amatic SC →