Free Stay Cozy SVG

Stay Cozy in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stay Cozy in Alfa Slab One, as a solid black shape
Stay Cozy in Alfa Slab One. The preview is the SVG file itself.

“Stay Cozy” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 88 mm (3.94 × 3.45 in), scales to any size
Pieces8 separate pieces
Outlines to cut10: 8 outer edges and 2 cut-outs
Cut length1,008 mm at this size
Narrowest part3.8 mm at this size
Nodes165 curve and line segments

Measured from the file. PNG: 2,000 × 1,762 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)0.97 mm256 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.75 in (51 × 45 mm)1.9 mm512 mm30Vinyl, card and thin sheet
3 × 2.63 in (76 × 67 mm)2.9 mm768 mm12Vinyl, card and thin sheet
4 × 3.5 in (102 × 89 mm)3.9 mm1,024 mm6Any material, including 3 mm wood and acrylic
6 × 5.26 in (152 × 134 mm)5.8 mm1,536 mm2Any material, including 3 mm wood and acrylic
8 × 7.01 in (203 × 178 mm)7.7 mm2,048 mm1Any material, including 3 mm wood and acrylic
12 × 10.51 in (305 × 267 mm)12 mm3,072 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Stay Cozy SVG files

← Stay Cozy in Lilita One All 13 Stay Cozy designs Stay Cozy in Amatic SC →