Split South Carolina for a name SVG
South Carolina divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of South Carolina are loose pieces: line them up with transfer tape.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 87 mm (3.94 × 3.41 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 2 outlines |
| Cut length | 410 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 124 curve and line segments |
Measured from the file. PNG: 2,000 × 1,740 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.87 in (25 × 22 mm) | Over 1.5 mm | 104 mm | 110 | Vinyl, card and thin sheet |
| 2 × 1.73 in (51 × 44 mm) | Over 3 mm | 208 mm | 30 | Any material, including 3 mm wood and acrylic |
| 3 × 2.6 in (76 × 66 mm) | Over 4.6 mm | 312 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.46 in (102 × 88 mm) | Over 6.1 mm | 417 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.19 in (152 × 132 mm) | Over 9.1 mm | 625 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.92 in (203 × 176 mm) | Over 12 mm | 833 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.38 in (305 × 264 mm) | Over 18 mm | 1,250 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More South Carolina SVG files
-
South Carolina in stripes Solid · 10 pieces -
Layered South Carolina on a hexagon Layered · 2 pieces -
South Carolina state silhouette Solid · one piece -
South Carolina state outline Outline · one piece -
South Carolina with a heart cut out Solid · one piece -
South Carolina cut from a disc Solid · one piece -
South Carolina cut from a square tile Solid · one piece -
South Carolina cut from a heart Solid · one piece
← South Carolina with its name beneath All 10 South Carolina designs South Carolina in stripes →