Free Softball Mom SVG

Softball Mom stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Softball Mom stencil plate, as a solid black shape
Softball Mom stencil plate. The preview is the SVG file itself.

A rounded plate with “SOFTBALL MOM” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 78 mm (3.94 × 3.08 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,484 mm at this size
Narrowest part1.7 mm at this size
Nodes247 curve and line segments

Measured from the file. PNG: 2,000 × 1,583 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.78 in (25 × 20 mm)0.43 mm377 mm120Too fine for most machines
2 × 1.57 in (51 × 40 mm)0.86 mm754 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.35 in (76 × 60 mm)1.3 mm1,131 mm12Vinyl, card and thin sheet
4 × 3.13 in (102 × 80 mm)1.7 mm1,508 mm6Vinyl, card and thin sheet
6 × 4.7 in (152 × 119 mm)2.6 mm2,262 mm2Vinyl, card and thin sheet
8 × 6.26 in (203 × 159 mm)3.5 mm3,015 mm1Any material, including 3 mm wood and acrylic
12 × 9.4 in (305 × 239 mm)5.2 mm4,523 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Softball Mom SVG files

← Softball Mom outline lettering All 13 Softball Mom designs Softball Mom with a drop shadow →