Free So Franken Cute SVG

So Franken Cute stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

So Franken Cute stencil plate, as a solid black shape
So Franken Cute stencil plate. The preview is the SVG file itself.

A rounded plate with “SO FRANKEN CUTE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size63 × 100 mm (2.49 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,381 mm at this size
Narrowest part0.7 mm at this size
Nodes311 curve and line segments

Measured from the file. PNG: 1,292 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.63 × 1 in (16 × 25 mm)0.18 mm351 mm140Too fine for most machines
1.26 × 2 in (32 × 51 mm)0.36 mm702 mm40Too fine for most machines
1.9 × 3 in (48 × 76 mm)0.53 mm1,052 mm15Fine detail: vinyl and paper only, weed with care
2.53 × 4 in (64 × 102 mm)0.71 mm1,403 mm8Fine detail: vinyl and paper only, weed with care
3.79 × 6 in (96 × 152 mm)1.1 mm2,105 mm3Vinyl, card and thin sheet
5.06 × 8 in (128 × 203 mm)1.4 mm2,806 mm2Vinyl, card and thin sheet
7.58 × 12 in (193 × 305 mm)2.1 mm4,209 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More So Franken Cute SVG files

← So Franken Cute outline lettering All 13 So Franken Cute designs So Franken Cute with a drop shadow →