Rub Some Dirt on It in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Rub Some Dirt on It” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 38 mm (3.94 × 1.48 in), scales to any size |
|---|---|
| Pieces | 16 separate pieces |
| Outlines to cut | 22: 16 outer edges and 6 cut-outs |
| Cut length | 891 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 280 curve and line segments |
Measured from the file. PNG: 2,000 × 800 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.38 in (25 × 10 mm) | 0.43 mm | 226 mm | 210 | Too fine for most machines |
| 2 × 0.75 in (51 × 19 mm) | 0.86 mm | 453 mm | 60 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.13 in (76 × 29 mm) | 1.3 mm | 679 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.5 in (102 × 38 mm) | 1.7 mm | 905 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.26 in (152 × 57 mm) | 2.6 mm | 1,358 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.01 in (203 × 76 mm) | 3.5 mm | 1,811 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.51 in (305 × 115 mm) | 5.2 mm | 2,716 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Rub Some Dirt on It SVG files
-
Rub Some Dirt on It in Amatic SC Solid · 15 pieces
-
Rub Some Dirt on It in block capitals Solid · 15 pieces
-
Rub Some Dirt on It in script and capitals Solid · 11 pieces
-
Rub Some Dirt on It with stars Solid · 17 pieces
-
Rub Some Dirt on It outline lettering Outline · 19 pieces
-
Rub Some Dirt on It stencil plate Solid · one piece
-
Rub Some Dirt on It with a drop shadow Layered · 14 pieces
-
Rub Some Dirt on It with a star Solid · 12 pieces
← Rub Some Dirt on It in Lilita One All 13 Rub Some Dirt on It designs Rub Some Dirt on It in Amatic SC →