Free Rise Up and Pray SVG

Rise Up and Pray in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rise Up and Pray in Alfa Slab One, as a solid black shape
Rise Up and Pray in Alfa Slab One. The preview is the SVG file itself.

“Rise Up and Pray” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 46 mm (3.94 × 1.82 in), scales to any size
Pieces14 separate pieces
Outlines to cut21: 14 outer edges and 7 cut-outs
Cut length906 mm at this size
Narrowest part2.1 mm at this size
Nodes282 curve and line segments

Measured from the file. PNG: 2,000 × 967 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.53 mm230 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.93 in (51 × 24 mm)1.1 mm460 mm50Vinyl, card and thin sheet
3 × 1.39 in (76 × 35 mm)1.6 mm690 mm21Vinyl, card and thin sheet
4 × 1.85 in (102 × 47 mm)2.1 mm920 mm10Vinyl, card and thin sheet
6 × 2.78 in (152 × 71 mm)3.2 mm1,381 mm4Any material, including 3 mm wood and acrylic
8 × 3.7 in (203 × 94 mm)4.3 mm1,841 mm3Any material, including 3 mm wood and acrylic
12 × 5.56 in (305 × 141 mm)6.4 mm2,761 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Rise Up and Pray SVG files

← Rise Up and Pray in Lilita One All 13 Rise Up and Pray designs Rise Up and Pray in Amatic SC →