Free Queens Are Born in September SVG

Queens Born in September in Lilita One SVG

Queens Born in September in Lilita One, as a solid black shape
Queens Born in September in Lilita One. The preview is the SVG file itself.

“Queens Are Born in September” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 65 mm (3.94 × 2.55 in), scales to any size
Pieces25 separate pieces
Outlines to cut38: 25 outer edges and 13 cut-outs
Cut length1,227 mm at this size
Narrowest part2.8 mm at this size
Nodes527 curve and line segments

Measured from the file. PNG: 2,000 × 1,323 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.71 mm312 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.3 in (51 × 33 mm)1.4 mm623 mm40Vinyl, card and thin sheet
3 × 1.94 in (76 × 49 mm)2.1 mm935 mm15Vinyl, card and thin sheet
4 × 2.59 in (102 × 66 mm)2.8 mm1,247 mm8Vinyl, card and thin sheet
6 × 3.89 in (152 × 99 mm)4.3 mm1,870 mm2Any material, including 3 mm wood and acrylic
8 × 5.18 in (203 × 132 mm)5.7 mm2,493 mm2Any material, including 3 mm wood and acrylic
12 × 7.78 in (305 × 198 mm)8.5 mm3,740 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Queens Are Born in September SVG files

← Queens Born in September in Kaushan Script All 12 Queens Are Born in September designs Queens Born in September in Alfa Slab One →