Free Queens Are Born in June SVG

Queens Born in June outline lettering SVG

Queens Born in June outline lettering, drawn as a line
Queens Born in June outline lettering. The preview is the SVG file itself.

“Queens Are Born in June” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 58 mm (3.94 × 2.27 in), scales to any size
Pieces22 separate pieces
Outlines to cut63: 22 outer edges and 41 cut-outs
Cut length1,534 mm at this size
Narrowest part1.4 mm at this size
Nodes594 curve and line segments

Measured from the file. PNG: 2,000 × 1,187 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.58 in (25 × 15 mm)0.36 mm390 mm150Too fine for most machines
2 × 1.15 in (51 × 29 mm)0.71 mm779 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.73 in (76 × 44 mm)1.1 mm1,169 mm18Vinyl, card and thin sheet
4 × 2.31 in (102 × 59 mm)1.4 mm1,559 mm8Vinyl, card and thin sheet
6 × 3.46 in (152 × 88 mm)2.1 mm2,338 mm3Vinyl, card and thin sheet
8 × 4.62 in (203 × 117 mm)2.8 mm3,117 mm2Vinyl, card and thin sheet
12 × 6.92 in (305 × 176 mm)4.3 mm4,676 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Queens Are Born in June SVG files

← Queens Born in June with stars All 12 Queens Are Born in June designs Queens Born in June stencil plate →