Free Proud Army Mom SVG

Proud Army Mom in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Proud Army Mom in Amatic SC, as a solid black shape
Proud Army Mom in Amatic SC. The preview is the SVG file itself.

“Proud Army Mom” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size51 × 100 mm (2.01 × 3.94 in), scales to any size
Pieces12 separate pieces
Outlines to cut19: 12 outer edges and 7 cut-outs
Cut length1,259 mm at this size
Narrowest part1.3 mm at this size
Nodes451 curve and line segments

Measured from the file. PNG: 1,058 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.51 × 1 in (13 × 25 mm)0.33 mm320 mm170Too fine for most machines
1.02 × 2 in (26 × 51 mm)0.66 mm640 mm50Fine detail: vinyl and paper only, weed with care
1.53 × 3 in (39 × 76 mm)0.99 mm959 mm21Fine detail: vinyl and paper only, weed with care
2.04 × 4 in (52 × 102 mm)1.3 mm1,279 mm10Vinyl, card and thin sheet
3.06 × 6 in (78 × 152 mm)2 mm1,919 mm3Vinyl, card and thin sheet
4.08 × 8 in (104 × 203 mm)2.6 mm2,558 mm2Vinyl, card and thin sheet
6.12 × 12 in (155 × 305 mm)4 mm3,837 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Proud Army Mom SVG files

← Proud Army Mom in Alfa Slab One All 13 Proud Army Mom designs Proud Army Mom in block capitals →