Free Probably Late for Something SVG

Probably Late for Something in Alfa Slab One SVG

Probably Late for Something in Alfa Slab One, as a solid black shape
Probably Late for Something in Alfa Slab One. The preview is the SVG file itself.

“Probably Late for Something” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 29 mm (3.94 × 1.15 in), scales to any size
Pieces23 separate pieces
Outlines to cut34: 23 outer edges and 11 cut-outs
Cut length957 mm at this size
Narrowest part1 mm at this size
Nodes704 curve and line segments

Measured from the file. PNG: 2,000 × 638 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.29 in (25 × 7 mm)0.25 mm243 mm240Too fine for most machines
2 × 0.58 in (51 × 15 mm)0.51 mm486 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.88 in (76 × 22 mm)0.76 mm729 mm33Fine detail: vinyl and paper only, weed with care
4 × 1.17 in (102 × 30 mm)1 mm972 mm16Vinyl, card and thin sheet
6 × 1.75 in (152 × 45 mm)1.5 mm1,458 mm6Vinyl, card and thin sheet
8 × 2.34 in (203 × 59 mm)2 mm1,945 mm4Vinyl, card and thin sheet
12 × 3.5 in (305 × 89 mm)3 mm2,917 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Probably Late for Something SVG files

← Probably Late for Something in Lilita One All 12 Probably Late for Something designs Probably Late for Something in Amatic SC →