Free penguin SVG

Christmas penguin in a Santa hat SVG

Christmas penguin in a Santa hat, as a solid black shape — Christmas penguin in a Santa hat. The preview is the SVG file itself.

The standing penguin in a Santa hat that flops to one side, with a wide brim and a bobble. For Christmas cards, gift tags and winter jumpers.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	66 × 100 mm (2.58 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	655 mm at this size
Narrowest part	2.3 mm at this size
Nodes	151 curve and line segments

Measured from the file. PNG: 1,338 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.66 × 1 in (17 × 25 mm)	0.58 mm	166 mm	140	Fine detail: vinyl and paper only, weed with care
1.31 × 2 in (33 × 51 mm)	1.2 mm	333 mm	40	Vinyl, card and thin sheet
1.97 × 3 in (50 × 76 mm)	1.8 mm	499 mm	15	Vinyl, card and thin sheet
2.62 × 4 in (67 × 102 mm)	2.3 mm	665 mm	8	Vinyl, card and thin sheet
3.94 × 6 in (100 × 152 mm)	3.5 mm	998 mm	2	Any material, including 3 mm wood and acrylic
5.25 × 8 in (133 × 203 mm)	4.7 mm	1,331 mm	2	Any material, including 3 mm wood and acrylic
7.87 × 12 in (200 × 305 mm)	7 mm	1,996 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More penguin SVG files

← Baby penguin All 12 penguins Penguin family →