Free Peace on Earth SVG

Peace on Earth in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peace on Earth in Amatic SC, as a solid black shape
Peace on Earth in Amatic SC. The preview is the SVG file itself.

“Peace on Earth” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 84 mm (3.94 × 3.3 in), scales to any size
Pieces12 separate pieces
Outlines to cut17: 12 outer edges and 5 cut-outs
Cut length1,376 mm at this size
Narrowest part1.3 mm at this size
Nodes416 curve and line segments

Measured from the file. PNG: 2,000 × 1,688 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.33 mm350 mm110Too fine for most machines
2 × 1.68 in (51 × 43 mm)0.66 mm699 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.51 in (76 × 64 mm)0.99 mm1,049 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.35 in (102 × 85 mm)1.3 mm1,398 mm6Vinyl, card and thin sheet
6 × 5.03 in (152 × 128 mm)2 mm2,097 mm2Vinyl, card and thin sheet
8 × 6.7 in (203 × 170 mm)2.6 mm2,796 mm1Vinyl, card and thin sheet
12 × 10.06 in (305 × 255 mm)4 mm4,194 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Peace on Earth SVG files

← Peace on Earth in Alfa Slab One All 13 Peace on Earth designs Peace on Earth in block capitals →