Free Peace and Joy SVG

Peace and Joy in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peace and Joy in Amatic SC, as a solid black shape
Peace and Joy in Amatic SC. The preview is the SVG file itself.

“Peace and Joy” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 95 mm (3.94 × 3.75 in), scales to any size
Pieces11 separate pieces
Outlines to cut16: 11 outer edges and 5 cut-outs
Cut length1,378 mm at this size
Narrowest part2.1 mm at this size
Nodes389 curve and line segments

Measured from the file. PNG: 2,000 × 1,908 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.95 in (25 × 24 mm)0.53 mm350 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)1.1 mm700 mm25Vinyl, card and thin sheet
3 × 2.86 in (76 × 73 mm)1.6 mm1,050 mm9Vinyl, card and thin sheet
4 × 3.81 in (102 × 97 mm)2.1 mm1,400 mm6Vinyl, card and thin sheet
6 × 5.71 in (152 × 145 mm)3.2 mm2,100 mm2Any material, including 3 mm wood and acrylic
8 × 7.62 in (203 × 193 mm)4.3 mm2,800 mm1Any material, including 3 mm wood and acrylic
12 × 11.42 in (305 × 290 mm)6.4 mm4,200 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Peace and Joy SVG files

← Peace and Joy in Alfa Slab One All 13 Peace and Joy designs Peace and Joy in block capitals →