Party at My Crib stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “PARTY AT MY CRIB” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.4 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 14: 1 outer edge and 13 cut-outs |
| Cut length | 1,266 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 324 curve and line segments |
Measured from the file. PNG: 2,000 × 1,248 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 15 mm) | 0.25 mm | 322 mm | 150 | Too fine for most machines |
| 2 × 1.22 in (51 × 31 mm) | 0.51 mm | 643 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.83 in (76 × 46 mm) | 0.76 mm | 965 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.44 in (102 × 62 mm) | 1 mm | 1,286 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.65 in (152 × 93 mm) | 1.5 mm | 1,929 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.87 in (203 × 124 mm) | 2 mm | 2,573 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.31 in (305 × 186 mm) | 3 mm | 3,859 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Party at My Crib SVG files
-
Party at My Crib with a drop shadow Layered · 10 pieces -
Party at My Crib in Pacifico Solid · 6 pieces -
Party at My Crib in Lobster Solid · 9 pieces -
Party at My Crib in Kaushan Script Solid · 14 pieces -
Party at My Crib in Lilita One Solid · 14 pieces -
Party at My Crib in Alfa Slab One Solid · 14 pieces -
Party at My Crib in Amatic SC Solid · 13 pieces -
Party at My Crib in block capitals Solid · 13 pieces
← Party at My Crib outline lettering All 12 Party at My Crib designs Party at My Crib with a drop shadow →