Free Our Nest SVG

Our Nest with a drop shadow SVG

Our Nest with a drop shadow, in layered colours
Our Nest with a drop shadow. The preview is the SVG file itself.

“Our Nest” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size88 × 100 mm (3.46 × 3.94 in), scales to any size
Pieces6 separate pieces
Outlines to cut12: 6 outer edges and 6 cut-outs
Cut length1,595 mm at this size
Narrowest part5.3 mm at this size
Nodes428 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 1,769 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.88 × 1 in (22 × 25 mm)1.3 mm405 mm110Vinyl, card and thin sheet
1.76 × 2 in (45 × 51 mm)2.7 mm810 mm30Vinyl, card and thin sheet
2.64 × 3 in (67 × 76 mm)4 mm1,215 mm12Any material, including 3 mm wood and acrylic
3.52 × 4 in (89 × 102 mm)5.4 mm1,621 mm6Any material, including 3 mm wood and acrylic
5.28 × 6 in (134 × 152 mm)8.1 mm2,431 mm2Any material, including 3 mm wood and acrylic
7.04 × 8 in (179 × 203 mm)11 mm3,241 mm1Any material, including 3 mm wood and acrylic
10.56 × 12 in (268 × 305 mm)16 mm4,862 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Our Nest SVG files

← Our Nest stencil plate All 12 Our Nest designs Our Nest in Pacifico →