Free Oregon SVG

Oregon with its name beneath SVG

Oregon with its name beneath, as a solid black shape — Oregon with its name beneath. The preview is the SVG file itself.

The solid state with “OREGON” in narrow capitals under it. The letters of “Oregon” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 95 mm (3.94 × 3.73 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	10: 7 outer edges and 3 cut-outs
Cut length	692 mm at this size
Narrowest part	2 mm at this size
Nodes	288 curve and line segments

Measured from the file. PNG: 2,000 × 1,900 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.51 mm	176 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)	1 mm	352 mm	25	Vinyl, card and thin sheet
3 × 2.84 in (76 × 72 mm)	1.5 mm	527 mm	12	Vinyl, card and thin sheet
4 × 3.79 in (102 × 96 mm)	2 mm	703 mm	6	Vinyl, card and thin sheet
6 × 5.69 in (152 × 144 mm)	3 mm	1,055 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.58 in (203 × 193 mm)	4.1 mm	1,406 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.38 in (305 × 289 mm)	6.1 mm	2,109 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Oregon SVG files

← Oregon cut from a heart All 10 Oregon designs Split Oregon for a name →