Free Oh Baby SVG

Oh Baby in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Oh Baby in Amatic SC, as a solid black shape
Oh Baby in Amatic SC. The preview is the SVG file itself.

“Oh Baby” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size58 × 100 mm (2.27 × 3.94 in), scales to any size
Pieces6 separate pieces
Outlines to cut12: 6 outer edges and 6 cut-outs
Cut length916 mm at this size
Narrowest part1.6 mm at this size
Nodes245 curve and line segments

Measured from the file. PNG: 1,185 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.58 × 1 in (15 × 25 mm)0.41 mm233 mm150Too fine for most machines
1.15 × 2 in (29 × 51 mm)0.81 mm465 mm45Fine detail: vinyl and paper only, weed with care
1.73 × 3 in (44 × 76 mm)1.2 mm698 mm18Vinyl, card and thin sheet
2.3 × 4 in (59 × 102 mm)1.6 mm931 mm8Vinyl, card and thin sheet
3.46 × 6 in (88 × 152 mm)2.4 mm1,396 mm3Vinyl, card and thin sheet
4.61 × 8 in (117 × 203 mm)3.3 mm1,861 mm2Any material, including 3 mm wood and acrylic
6.91 × 12 in (176 × 305 mm)4.9 mm2,792 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Oh Baby SVG files

← Oh Baby in Alfa Slab One All 13 Oh Baby designs Oh Baby in block capitals →