Free Norway SVG

Norway cut from a square tile SVG

Norway cut from a square tile, as a solid black shape
Norway cut from a square tile. The preview is the SVG file itself.

A square tile with rounded corners, 100 mm each way, with Norway cut out of it. Cut the tile from wood or acrylic for a trivet or a wall plaque, or use it as a stencil to paint Norway on a bag or a board.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length645 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes344 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)Over 1.5 mm164 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)Over 3 mm328 mm25Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)Over 4.6 mm491 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)Over 6.1 mm655 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)Over 9.1 mm983 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)Over 12 mm1,311 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)Over 18 mm1,966 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Norway SVG files

← Norway cut from a disc All 8 Norway designs Norway cut from a heart →