Nobody Likes a Shady Beach in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Nobody Likes a Shady Beach” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 33 mm (3.94 × 1.3 in), scales to any size |
|---|---|
| Pieces | 23 separate pieces |
| Outlines to cut | 35: 23 outer edges and 12 cut-outs |
| Cut length | 911 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 373 curve and line segments |
Measured from the file. PNG: 2,000 × 710 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.33 in (25 × 8 mm) | 0.43 mm | 231 mm | 230 | Too fine for most machines |
| 2 × 0.66 in (51 × 17 mm) | 0.86 mm | 463 mm | 70 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.99 in (76 × 25 mm) | 1.3 mm | 694 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.32 in (102 × 33 mm) | 1.7 mm | 926 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.97 in (152 × 50 mm) | 2.6 mm | 1,388 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.63 in (203 × 67 mm) | 3.5 mm | 1,851 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.95 in (305 × 100 mm) | 5.2 mm | 2,777 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Nobody Likes a Shady Beach SVG files
-
Nobody Likes a Shady Beach in Alfa Slab One Solid · 20 pieces
-
Nobody Likes a Shady Beach in Amatic SC Solid · 22 pieces
-
Nobody Likes a Shady Beach in block capitals Solid · 22 pieces
-
Nobody Likes a Shady Beach in script and capitals Solid · 14 pieces
-
Nobody Likes a Shady Beach with stars Solid · 17 pieces
-
Nobody Likes a Shady Beach outline lettering Outline · 23 pieces
-
Nobody Likes a Shady Beach stencil plate Solid · one piece
-
Nobody Likes a Shady Beach with a drop shadow Layered · 11 pieces
← Nobody Likes a Shady Beach in Kaushan Script All 13 Nobody Likes a Shady Beach designs Nobody Likes a Shady Beach in Alfa Slab One →