No One Likes a Shady Beach in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“No One Likes a Shady Beach” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 33 mm (3.94 × 1.3 in), scales to any size |
|---|---|
| Pieces | 22 separate pieces |
| Outlines to cut | 33: 22 outer edges and 11 cut-outs |
| Cut length | 878 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 367 curve and line segments |
Measured from the file. PNG: 2,000 × 710 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.33 in (25 × 8 mm) | 0.43 mm | 223 mm | 230 | Too fine for most machines |
| 2 × 0.66 in (51 × 17 mm) | 0.86 mm | 446 mm | 70 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.99 in (76 × 25 mm) | 1.3 mm | 669 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.32 in (102 × 33 mm) | 1.7 mm | 892 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.97 in (152 × 50 mm) | 2.6 mm | 1,338 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.63 in (203 × 67 mm) | 3.5 mm | 1,784 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.95 in (305 × 100 mm) | 5.2 mm | 2,676 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More No One Likes a Shady Beach SVG files
-
No One Likes a Shady Beach in Alfa Slab One Solid · 21 pieces
-
No One Likes a Shady Beach in Amatic SC Solid · 21 pieces
-
No One Likes a Shady Beach in block capitals Solid · 21 pieces
-
No One Likes a Shady Beach in script and capitals Solid · 16 pieces
-
No One Likes a Shady Beach with stars Solid · 18 pieces
-
No One Likes a Shady Beach outline lettering Outline · 24 pieces
-
No One Likes a Shady Beach stencil plate Solid · one piece
-
No One Likes a Shady Beach with a drop shadow Layered · 14 pieces
← No One Likes a Shady Beach in Kaushan Script All 13 No One Likes a Shady Beach designs No One Likes a Shady Beach in Alfa Slab One →