Free Nicaragua SVG

Split Nicaragua for a name SVG

Split Nicaragua for a name, as a solid black shape
Split Nicaragua for a name. The preview is the SVG file itself.

Nicaragua divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of Nicaragua are loose pieces: line them up with transfer tape.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size95 × 100 mm (3.73 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut2 outlines
Cut length477 mm at this size
Narrowest part2 mm at this size
Nodes294 curve and line segments

Measured from the file. PNG: 1,898 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.51 mm121 mm100Fine detail: vinyl and paper only, weed with care
1.89 × 2 in (48 × 51 mm)1 mm242 mm25Vinyl, card and thin sheet
2.84 × 3 in (72 × 76 mm)1.5 mm363 mm12Vinyl, card and thin sheet
3.79 × 4 in (96 × 102 mm)2 mm485 mm6Vinyl, card and thin sheet
5.68 × 6 in (144 × 152 mm)3 mm727 mm2Any material, including 3 mm wood and acrylic
7.58 × 8 in (192 × 203 mm)4.1 mm969 mm1Any material, including 3 mm wood and acrylic
11.36 × 12 in (289 × 305 mm)6.1 mm1,454 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Nicaragua SVG files

← Nicaragua with its name beneath All 10 Nicaragua designs Nicaragua in stripes →