Free New Zealand SVG

New Zealand cut from a disc SVG

New Zealand cut from a disc, as a solid black shape
New Zealand cut from a disc. The preview is the SVG file itself.

A disc 100 mm across with the shape of New Zealand cut out of its middle. One piece: New Zealand shows in whatever is behind it, on a coaster, a hanging ornament or a round decal.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length551 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes285 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)Over 1.5 mm140 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)Over 3 mm280 mm25Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)Over 4.6 mm420 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)Over 6.1 mm560 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)Over 9.1 mm840 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)Over 12 mm1,120 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)Over 18 mm1,679 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More New Zealand SVG files

← New Zealand outline All 8 New Zealand designs New Zealand cut from a square tile →