Free Never Grow Up SVG

Never Grow Up in Alfa Slab One SVG

Never Grow Up in Alfa Slab One, as a solid black shape
Never Grow Up in Alfa Slab One. The preview is the SVG file itself.

“Never Grow Up” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 48 mm (3.94 × 1.88 in), scales to any size
Pieces11 separate pieces
Outlines to cut15: 11 outer edges and 4 cut-outs
Cut length808 mm at this size
Narrowest part2.5 mm at this size
Nodes353 curve and line segments

Measured from the file. PNG: 2,000 × 996 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.64 mm205 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.96 in (51 × 24 mm)1.3 mm410 mm50Vinyl, card and thin sheet
3 × 1.43 in (76 × 36 mm)1.9 mm616 mm21Vinyl, card and thin sheet
4 × 1.91 in (102 × 49 mm)2.5 mm821 mm10Vinyl, card and thin sheet
6 × 2.87 in (152 × 73 mm)3.8 mm1,231 mm3Any material, including 3 mm wood and acrylic
8 × 3.82 in (203 × 97 mm)5.1 mm1,642 mm3Any material, including 3 mm wood and acrylic
12 × 5.74 in (305 × 146 mm)7.6 mm2,463 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Never Grow Up SVG files

← Never Grow Up in Lilita One All 12 Never Grow Up designs Never Grow Up in Amatic SC →