Free My First Easter SVG

My First Easter in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

My First Easter in Lilita One, as a solid black shape
My First Easter in Lilita One. The preview is the SVG file itself.

“My First Easter” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 51 mm (3.94 × 2.01 in), scales to any size
Pieces14 separate pieces
Outlines to cut16: 14 outer edges and 2 cut-outs
Cut length857 mm at this size
Narrowest part2.9 mm at this size
Nodes282 curve and line segments

Measured from the file. PNG: 2,000 × 1,060 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.74 mm218 mm170Fine detail: vinyl and paper only, weed with care
2 × 1.02 in (51 × 26 mm)1.5 mm435 mm45Vinyl, card and thin sheet
3 × 1.53 in (76 × 39 mm)2.2 mm653 mm21Vinyl, card and thin sheet
4 × 2.04 in (102 × 52 mm)2.9 mm871 mm10Vinyl, card and thin sheet
6 × 3.07 in (152 × 78 mm)4.4 mm1,306 mm3Any material, including 3 mm wood and acrylic
8 × 4.09 in (203 × 104 mm)5.9 mm1,741 mm2Any material, including 3 mm wood and acrylic
12 × 6.13 in (305 × 156 mm)8.8 mm2,612 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More My First Easter SVG files

← My First Easter in Kaushan Script All 13 My First Easter designs My First Easter in Alfa Slab One →