Free Mother’s Day card SVG

Pop up Mother’s Day card with tulips SVG

Pop up Mother’s Day card with tulips, as a solid black shape
Pop up Mother’s Day card with tulips. The preview is the SVG file itself.

Two loose pieces. The inner sheet has a planter with three tulips that stand up above it when the card is opened to a right angle, under three hearts cut out of the wall; glue it into the cover. Cut the file 280 mm wide: the inner sheet folds to 132 mm square.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 96 mm (3.94 × 3.79 in), scales to any size
Pieces2 separate pieces
Outlines to cut40: 2 outer edges and 38 cut-outs
Cut length1,087 mm at this size
Narrowest part1.5 mm at this size
Nodes307 curve and line segments

Measured from the file. PNG: 2,000 × 1,927 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.38 mm276 mm100Too fine for most machines
2 × 1.92 in (51 × 49 mm)0.76 mm552 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.89 in (76 × 73 mm)1.1 mm828 mm9Vinyl, card and thin sheet
4 × 3.85 in (102 × 98 mm)1.5 mm1,104 mm6Vinyl, card and thin sheet
6 × 5.77 in (152 × 147 mm)2.3 mm1,657 mm2Vinyl, card and thin sheet
8 × 7.7 in (203 × 195 mm)3 mm2,209 mm1Any material, including 3 mm wood and acrylic
12 × 11.54 in (305 × 293 mm)4.6 mm3,313 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mother’s Day card SVG files

← Small Mother’s Day card with a daisy All 11 Mother’s Day cards Mother’s Day card template to print and cut by hand →