Mom in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Mom” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 100 × 33 mm (3.94 × 1.31 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 526 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 137 curve and line segments |
Measured from the file. PNG: 2,000 × 719 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.33 in (25 × 8 mm) | 0.71 mm | 134 mm | 220 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.67 in (51 × 17 mm) | 1.4 mm | 267 mm | 70 | Vinyl, card and thin sheet |
| 3 × 1 in (76 × 25 mm) | 2.1 mm | 401 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.34 in (102 × 34 mm) | 2.8 mm | 534 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2 in (152 × 51 mm) | 4.3 mm | 802 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.67 in (203 × 68 mm) | 5.7 mm | 1,069 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 4.01 in (305 × 102 mm) | 8.5 mm | 1,603 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.