Free Mom of Boys SVG

Mom of Boys in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mom of Boys in Alfa Slab One, as a solid black shape
Mom of Boys in Alfa Slab One. The preview is the SVG file itself.

“Mom of Boys” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 57 mm (3.94 × 2.25 in), scales to any size
Pieces9 separate pieces
Outlines to cut14: 9 outer edges and 5 cut-outs
Cut length836 mm at this size
Narrowest part2.3 mm at this size
Nodes200 curve and line segments

Measured from the file. PNG: 2,000 × 1,177 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 15 mm)0.58 mm212 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.14 in (51 × 29 mm)1.2 mm425 mm45Vinyl, card and thin sheet
3 × 1.72 in (76 × 44 mm)1.8 mm637 mm18Vinyl, card and thin sheet
4 × 2.29 in (102 × 58 mm)2.3 mm849 mm8Vinyl, card and thin sheet
6 × 3.43 in (152 × 87 mm)3.5 mm1,274 mm3Any material, including 3 mm wood and acrylic
8 × 4.58 in (203 × 116 mm)4.7 mm1,699 mm2Any material, including 3 mm wood and acrylic
12 × 6.86 in (305 × 174 mm)7 mm2,548 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mom of Boys SVG files

← Mom of Boys in Lilita One All 13 Mom of Boys designs Mom of Boys in Amatic SC →