Free Mississippi SVG

Split Mississippi for a name SVG

Split Mississippi for a name, as a solid black shape
Split Mississippi for a name. The preview is the SVG file itself.

Mississippi divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of Mississippi are loose pieces: line them up with transfer tape.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size61 × 100 mm (2.39 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut2 outlines
Cut length374 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes142 curve and line segments

Measured from the file. PNG: 1,244 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.61 × 1 in (15 × 25 mm)Over 1.5 mm95 mm150Vinyl, card and thin sheet
1.21 × 2 in (31 × 51 mm)Over 3 mm190 mm40Any material, including 3 mm wood and acrylic
1.82 × 3 in (46 × 76 mm)Over 4.6 mm285 mm18Any material, including 3 mm wood and acrylic
2.43 × 4 in (62 × 102 mm)Over 6.1 mm380 mm8Any material, including 3 mm wood and acrylic
3.64 × 6 in (93 × 152 mm)Over 9.1 mm570 mm3Any material, including 3 mm wood and acrylic
4.86 × 8 in (123 × 203 mm)Over 12 mm760 mm2Any material, including 3 mm wood and acrylic
7.28 × 12 in (185 × 305 mm)Over 18 mm1,140 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mississippi SVG files

← Mississippi with its name beneath All 10 Mississippi designs Mississippi in stripes →