Free Michigan SVG

Michigan with its name beneath SVG

Michigan with its name beneath, as a solid black shape — Michigan with its name beneath. The preview is the SVG file itself.

The solid state with “MICHIGAN” in narrow capitals under it. The letters of “Michigan” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	82 × 100 mm (3.21 × 3.94 in), scales to any size
Pieces	10 separate pieces
Outlines to cut	11: 10 outer edges and 1 cut-out
Cut length	776 mm at this size
Narrowest part	1.5 mm at this size
Nodes	503 curve and line segments

Measured from the file. PNG: 1,644 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.82 × 1 in (21 × 25 mm)	0.38 mm	197 mm	120	Too fine for most machines
1.63 × 2 in (41 × 51 mm)	0.76 mm	394 mm	30	Fine detail: vinyl and paper only, weed with care
2.44 × 3 in (62 × 76 mm)	1.1 mm	591 mm	12	Vinyl, card and thin sheet
3.26 × 4 in (83 × 102 mm)	1.5 mm	788 mm	6	Vinyl, card and thin sheet
4.89 × 6 in (124 × 152 mm)	2.3 mm	1,183 mm	2	Vinyl, card and thin sheet
6.52 × 8 in (166 × 203 mm)	3 mm	1,577 mm	1	Any material, including 3 mm wood and acrylic
9.78 × 12 in (248 × 305 mm)	4.6 mm	2,365 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Michigan SVG files

← Michigan cut from a heart All 9 Michigan designs Split Michigan for a name →