Free Mexico SVG

Split Mexico for a name SVG

Split Mexico for a name, as a solid black shape — Split Mexico for a name. The preview is the SVG file itself.

Mexico divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of Mexico are loose pieces: line them up with transfer tape.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 67 mm (3.94 × 2.65 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	2 outlines
Cut length	368 mm at this size
Narrowest part	2.4 mm at this size
Nodes	308 curve and line segments

Measured from the file. PNG: 2,000 × 1,373 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.67 in (25 × 17 mm)	0.61 mm	93 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.35 in (51 × 34 mm)	1.2 mm	187 mm	35	Vinyl, card and thin sheet
3 × 2.02 in (76 × 51 mm)	1.8 mm	280 mm	15	Vinyl, card and thin sheet
4 × 2.7 in (102 × 68 mm)	2.4 mm	374 mm	8	Vinyl, card and thin sheet
6 × 4.04 in (152 × 103 mm)	3.7 mm	561 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.39 in (203 × 137 mm)	4.9 mm	748 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.09 in (305 × 205 mm)	7.3 mm	1,122 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mexico SVG files

← Mexico with its name beneath All 9 Mexico designs Mexico in stripes →