Free Merry SVG

Merry in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merry in Alfa Slab One, as a solid black shape
Merry in Alfa Slab One. The preview is the SVG file itself.

“Merry” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 29 mm (3.94 × 1.15 in), scales to any size
Pieces5 separate pieces
Outlines to cut6: 5 outer edges and 1 cut-out
Cut length513 mm at this size
Narrowest part3.3 mm at this size
Nodes108 curve and line segments

Measured from the file. PNG: 2,000 × 640 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.29 in (25 × 7 mm)0.84 mm130 mm240Fine detail: vinyl and paper only, weed with care
2 × 0.59 in (51 × 15 mm)1.7 mm261 mm75Vinyl, card and thin sheet
3 × 0.88 in (76 × 22 mm)2.5 mm391 mm33Vinyl, card and thin sheet
4 × 1.17 in (102 × 30 mm)3.4 mm521 mm16Any material, including 3 mm wood and acrylic
6 × 1.76 in (152 × 45 mm)5 mm782 mm6Any material, including 3 mm wood and acrylic
8 × 2.34 in (203 × 60 mm)6.7 mm1,042 mm4Any material, including 3 mm wood and acrylic
12 × 3.52 in (305 × 89 mm)10 mm1,564 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merry SVG files

← Merry in Lilita One All 13 Merry designs Merry in Amatic SC →