Free Maine SVG

Maine with its name beneath SVG

Maine with its name beneath, as a solid black shape — Maine with its name beneath. The preview is the SVG file itself.

The solid state with “MAINE” in narrow capitals under it. The letters of “Maine” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	55 × 100 mm (2.16 × 3.94 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	7: 6 outer edges and 1 cut-out
Cut length	512 mm at this size
Narrowest part	1.5 mm at this size
Nodes	275 curve and line segments

Measured from the file. PNG: 1,131 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.55 × 1 in (14 × 25 mm)	0.38 mm	130 mm	160	Too fine for most machines
1.1 × 2 in (28 × 51 mm)	0.76 mm	260 mm	45	Fine detail: vinyl and paper only, weed with care
1.64 × 3 in (42 × 76 mm)	1.1 mm	390 mm	18	Vinyl, card and thin sheet
2.19 × 4 in (56 × 102 mm)	1.5 mm	520 mm	10	Vinyl, card and thin sheet
3.29 × 6 in (84 × 152 mm)	2.3 mm	780 mm	3	Vinyl, card and thin sheet
4.38 × 8 in (111 × 203 mm)	3 mm	1,040 mm	2	Any material, including 3 mm wood and acrylic
6.58 × 12 in (167 × 305 mm)	4.6 mm	1,561 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Maine SVG files

← Maine cut from a heart All 10 Maine designs Split Maine for a name →