Free Maid of Honor SVG

Maid of Honor outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Maid of Honor outline lettering, drawn as a line
Maid of Honor outline lettering. The preview is the SVG file itself.

“Maid of Honor” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 52 mm (3.94 × 2.04 in), scales to any size
Pieces16 separate pieces
Outlines to cut35: 16 outer edges and 19 cut-outs
Cut length1,445 mm at this size
Narrowest part1.4 mm at this size
Nodes399 curve and line segments

Measured from the file. PNG: 2,000 × 1,073 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.52 in (25 × 13 mm)0.36 mm367 mm160Too fine for most machines
2 × 1.04 in (51 × 26 mm)0.71 mm734 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.55 in (76 × 39 mm)1.1 mm1,101 mm18Vinyl, card and thin sheet
4 × 2.07 in (102 × 53 mm)1.4 mm1,468 mm10Vinyl, card and thin sheet
6 × 3.11 in (152 × 79 mm)2.1 mm2,202 mm3Vinyl, card and thin sheet
8 × 4.14 in (203 × 105 mm)2.8 mm2,936 mm2Vinyl, card and thin sheet
12 × 6.22 in (305 × 158 mm)4.3 mm4,404 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Maid of Honor SVG files

← Maid of Honor with hearts All 13 Maid of Honor designs Maid of Honor stencil plate →