Free Made With Love SVG

Made With Love in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Made With Love in Amatic SC, as a solid black shape
Made With Love in Amatic SC. The preview is the SVG file itself.

“Made With Love” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 74 mm (3.94 × 2.9 in), scales to any size
Pieces12 separate pieces
Outlines to cut15: 12 outer edges and 3 cut-outs
Cut length1,267 mm at this size
Narrowest part1.2 mm at this size
Nodes462 curve and line segments

Measured from the file. PNG: 2,000 × 1,492 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.74 in (25 × 19 mm)0.3 mm322 mm130Too fine for most machines
2 × 1.47 in (51 × 37 mm)0.61 mm644 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.21 in (76 × 56 mm)0.91 mm965 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.94 in (102 × 75 mm)1.2 mm1,287 mm6Vinyl, card and thin sheet
6 × 4.42 in (152 × 112 mm)1.8 mm1,931 mm2Vinyl, card and thin sheet
8 × 5.89 in (203 × 150 mm)2.4 mm2,575 mm2Vinyl, card and thin sheet
12 × 8.83 in (305 × 224 mm)3.7 mm3,862 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Made With Love SVG files

← Made With Love in Alfa Slab One All 12 Made With Love designs Made With Love in block capitals →