Longhorn steer with patches, walking SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A steer on the move with four patches cut out of its side and two dots for eyes, so that on a pale surface it reads as a spotted longhorn. Lean and long in the leg, as the breed is.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 59 mm (3.94 × 2.33 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 747 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 347 curve and line segments |
Measured from the file. PNG: 2,000 × 1,217 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.59 in (25 × 15 mm) | 0.53 mm | 190 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.19 in (51 × 30 mm) | 1.1 mm | 379 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.78 in (76 × 45 mm) | 1.6 mm | 569 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.37 in (102 × 60 mm) | 2.1 mm | 759 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.56 in (152 × 90 mm) | 3.2 mm | 1,138 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.74 in (203 × 120 mm) | 4.3 mm | 1,518 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.12 in (305 × 181 mm) | 6.4 mm | 2,277 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More longhorn SVG files
-
Longhorn skull Solid · one piece -
Longhorn horns, mounted Solid · one piece -
Longhorn steer at sunset in a circle Solid · one piece -
Longhorn cattle, three on the range Solid · one piece -
Cute longhorn calf face Solid · one piece -
Longhorn ranch sign with a blank board Solid · one piece -
Longhorn monogram frame Solid · one piece -
Longhorn head on a star Solid · one piece
← Longhorn steer silhouette All 14 longhorns Longhorn skull →