Free letter X SVG

Polka dot letter X SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Polka dot letter X, as a solid black shape
Polka dot letter X. The preview is the SVG file itself.

A chunky X with round holes punched through it in a staggered grid. Every dot sits fully inside the letter, so the edge stays clean and the letter stays in one piece.

What is in the file

Size92 × 100 mm (3.62 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut43: 1 outer edge and 42 cut-outs
Cut length1,128 mm at this size
Narrowest part3.4 mm at this size
Nodes205 curve and line segments

Measured from the file. PNG: 1,846 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.86 mm287 mm100Fine detail: vinyl and paper only, weed with care
1.84 × 2 in (47 × 51 mm)1.7 mm573 mm25Vinyl, card and thin sheet
2.76 × 3 in (70 × 76 mm)2.6 mm860 mm12Vinyl, card and thin sheet
3.68 × 4 in (93 × 102 mm)3.5 mm1,146 mm6Any material, including 3 mm wood and acrylic
5.52 × 6 in (140 × 152 mm)5.2 mm1,719 mm2Any material, including 3 mm wood and acrylic
7.36 × 8 in (187 × 203 mm)6.9 mm2,292 mm1Any material, including 3 mm wood and acrylic
11.04 × 12 in (280 × 305 mm)10 mm3,438 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter X SVG files

← Letter X outline All 18 letter X designs Letter X in a laurel wreath →