Free letter R SVG

Letter R outline SVG

Letter R outline, drawn as a line
Letter R outline. The preview is the SVG file itself.

The block R as an outline 2.4 mm wide, hollow inside, with a second loop round its counter. For colouring, for foil and pen work, or to layer over the solid letter in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size98 × 100 mm (3.87 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut4: 2 outer edges and 2 cut-outs
Cut length1,104 mm at this size
Narrowest part2 mm at this size
Nodes84 curve and line segments

Measured from the file. PNG: 1,965 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)0.51 mm280 mm100Fine detail: vinyl and paper only, weed with care
1.96 × 2 in (50 × 51 mm)1 mm561 mm25Vinyl, card and thin sheet
2.95 × 3 in (75 × 76 mm)1.5 mm841 mm9Vinyl, card and thin sheet
3.93 × 4 in (100 × 102 mm)2 mm1,122 mm4Vinyl, card and thin sheet
5.89 × 6 in (150 × 152 mm)3 mm1,682 mm2Any material, including 3 mm wood and acrylic
7.86 × 8 in (200 × 203 mm)4.1 mm2,243 mm1Any material, including 3 mm wood and acrylic
11.78 × 12 in (299 × 305 mm)6.1 mm3,365 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter R SVG files

← Letter R stencil plate All 18 letter R designs Polka dot letter R →