Free letter Q SVG

Letter Q in Lilita One SVG

Letter Q in Lilita One, as a solid black shape — Letter Q in Lilita One. The preview is the SVG file itself.

The capital Q of Lilita One, a chunky rounded sans, as one welded shape 100 mm tall. It has one closed counter, cut as a hole in the letter.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	72 × 100 mm (2.82 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	388 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	28 curve and line segments

Measured from the file. PNG: 1,454 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.72 × 1 in (18 × 25 mm)	Over 1.5 mm	99 mm	130	Vinyl, card and thin sheet
1.43 × 2 in (36 × 51 mm)	Over 3 mm	197 mm	35	Any material, including 3 mm wood and acrylic
2.15 × 3 in (55 × 76 mm)	Over 4.6 mm	296 mm	15	Any material, including 3 mm wood and acrylic
2.86 × 4 in (73 × 102 mm)	Over 6.1 mm	394 mm	6	Any material, including 3 mm wood and acrylic
4.3 × 6 in (109 × 152 mm)	Over 9.1 mm	591 mm	2	Any material, including 3 mm wood and acrylic
5.73 × 8 in (145 × 203 mm)	Over 12 mm	788 mm	2	Any material, including 3 mm wood and acrylic
8.59 × 12 in (218 × 305 mm)	Over 18 mm	1,183 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter Q SVG files

← Letter Q in UnifrakturMaguntia All 18 letter Q designs Letter Q in a ring monogram →