Free letter M SVG

Letter M outline SVG

Letter M outline, drawn as a line — Letter M outline. The preview is the SVG file itself.

The block M as an outline 2.4 mm wide, hollow inside. For colouring, for foil and pen work, or to layer over the solid letter in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 71 mm (3.94 × 2.8 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	1,088 mm at this size
Narrowest part	1.4 mm at this size
Nodes	75 curve and line segments

Measured from the file. PNG: 2,000 × 1,442 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.71 in (25 × 18 mm)	0.36 mm	276 mm	130	Too fine for most machines
2 × 1.42 in (51 × 36 mm)	0.71 mm	553 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.13 in (76 × 54 mm)	1.1 mm	829 mm	15	Vinyl, card and thin sheet
4 × 2.84 in (102 × 72 mm)	1.4 mm	1,105 mm	8	Vinyl, card and thin sheet
6 × 4.26 in (152 × 108 mm)	2.1 mm	1,658 mm	2	Vinyl, card and thin sheet
8 × 5.68 in (203 × 144 mm)	2.8 mm	2,211 mm	2	Vinyl, card and thin sheet
12 × 8.52 in (305 × 216 mm)	4.3 mm	3,316 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter M SVG files

← Letter M stencil plate All 18 letter M designs Polka dot letter M →